MKM-830S Multiplexer is the third generation embedded multiplexer which is researched and developped by Glmingke .It offers strong capabilities¡¢user-friendly interface¡¢high performance and cost-effective£¬ideally suited for program transmission platform and Digital TV head-end systems.

  Key Features

1. DVB Multiplexing of up to 8 MPEG-2 Transport streams (SPTS/MPTS or a PID stream).
2. Meet ISO/IEC13818¡BETSI EN300468 and ETR211 standard.The support cascade to use.
3. Up to 8 transport stream inputs¡AUp to 2 homologous transport stream outputs
4. High performance ASI input up to 120Mbit/s and support burst mode
5. Up to 100Mb/s output rate
6. PID remapping and transport stream processing Advanced PSI/SI auto-generation and processing
7. Support Auto and manual PID filtering/re-mapping on each inputs
8. Support Auto and manual Service_ID filtering/re-mapping on each inputs
9. Advanced PSI/SI regeneration and editing
10. Robust and user-friendly monitor interface and human-computer control
11. Robust PSI/SI information analysis and edit function, input stream error warning
12. Multiplexing of the elementary stream and manual reconfiguration services
13. PSI/SI extracion¡Aediton and remapping of PAT/NIT/SDT/CAT. etc.
14. DVB G.703 output:DS3/E3(optional)
15. Choose to send any form of PSI/SI information
16. Supports 1~16 set of single program (SPTS) and the (MPTS) multi-programs multiplying, participation multiplying PID up to128.
17. Eight group ASI inputs most allows 180 sets of programs to input. (program shared by 8 port input)
18. Two group homologous ASI output, the output code rate may adjust freewill in the 0~100Mbps, the lowest adjustment length of stride unit 1Mbps .
19. Automatic detecting 188/204 inputs a TS package of form, and outputs TS package length (188/204) can be choose the setup.
20. Supports informations of EPG, EMM, ECM, etc. and data from inputs the port insertion freewill, the user choice inserts PID up to 32.
21. Each set of input program hardware solution multiplying, and make all kinds of PSI/SI information table automatically.
22. The program searching and the solution multiplying module are realized by the pure hardware, so it does not take any CPU expenses.
23. All the input program informations which can be edited or re-mapped included as follows: the program name, the program provider name, any inputs PID, Service_ID, EIT_schedule_flag, EIT_present_following_flag, running_status, Free_CA_mode, service_Type, Transport_Stream_ID, Original_network_ID, Network

  Applications

•Fixed Distribution/Contribution
•Multi channel mobile contribution
•Satellite, Cable, DVB-T, MMDS
•Transport stream processing
•PSI/SI tables injector
•Small-to-medium head-end applications
•Digital Turnaround

  INPUT

DVB ASI
•8 standard ASI ports (BNC)£¬Support MPTS /SPTS input
•Impedance: 75 ¦¸
•TS Bit rate:up to 120Mbps
•Maximum Input program total number: 180(8 asi port)
•Packet length: 188 or 204 bytes

  OUTPUT

DVB ASI
•2 homologous standard ASI output ports (BNC)
•Impedance: 75 ¦¸
•Packet length: 188 or 204 bytes
•Multiplexing output bit rate: up to 100Mbps
•Interface: copper

G.703(optional)

•unframed DS3(45M),E3(34M)
•Interface: copper

  ULTIPLEXING

•PSI/SI auto-generation
•Full PSI/SI table edition
•EPG insertion
•Up to 8191 PIDs for each input/output
•PCR correction and restamping
•PID scanning and remapping
•Service_ID scanning and remapping

  CONTROL AND MANAGEMENT

•Front panel £ºSix buttons and a LCD
•10M Base-T Ethernet interface for TCP/IP and SNMP management
•Background control software,realize configuration of TS input/output
•Can save setup Information on PC

  PHYSICAL AND POWER

 DIMENSIONS(H x W x D)  
•1RU(19¡±rack)
•4.4cm x 48.3cm x 42cm(1.75¡± x 19¡± x 16.5¡±);

  POWER INPUT
•50HZ AC 220V ¡À20%

  APPROX WEIGHT
•Weight: 4.4KG

  CONSUMPTION
•POWER:<8W