Add to Favorites Set Home page 中文版
 
  Search
Please enter a product name
产品搜索
  Contact us

Online Service:
    

Sales QQ:
销售QQ 
Service QQ:
客服QQ 
Technical QQ:
技术QQ

Address: 5rd Floor, Block C, Innovation Building, Information Industry Park,
            ChaoYang Road, Qi Xing District,Guilin,China

EL:86-773-5800805/5820488  
FAX:86-773-5820488   
E-mail :glmingke_88@hotmail.com

 
 
  Digital Head end Equipment Current Location: Home >> Digital Head end Equipment   
 

MKQR-633 Two-Way Data Modulator

日期: 2013-5-24
 
Product Introduction
 
MKQR-633 two-way data modulator has built-in dual—port date modulator and high anti-interference
bit stream module.
 
It adopts advanced digital signal processing technology, fully in line with DVB-S standards.
 
Data modulator, in the handling of data flow, adopts random processing of energy diffusion,
RS coding, convolution intertwined, and contract convolutional code, modulation before forming
the base-band processing, ect., to ensure that the data transmission performance. With perfect
and advanced error correcting capability, compared with common PDH/SDH microwave and network
bridge, it has higher demodulation threshold.
 
The stream receiving port offers high efficient code rate and cache controlling, having a high
reliability, good stability and high ant-interference, integrating independent and exclusive stream
receiving module inside the 1 U chassis. It can overcome problem such as crash, and so on.
 
Performance indexes
 
ASI interface technical parameters
 
★  QPSK modulation
★  Input interfaces in line with ASI standards
★  Roll-off factor:     0.15
★  IF output range  
   Normal input:930MHz ~ 2400MHz 
   Optional input:70MHz、450MHz ~ 950MHz (optional for section,each section 250M broadband) 
   Notes:Normal input refers to normal used frequency output.
   Optional input refers to customized frequency output.
   RF output port feeds outside, and do not form short circuit while operating
★  Level output range: -33dBm ~ -3dBm,-23dBm ~ +7dBm(optional).
★  Inner encoding rate:   1/2  2/3  3/4  5/6  7/8  CW(Optional set)
                  Thereinto, CW is outgoing-carrier, with the output level of -10dBm
★  Stream speed: 1/2:1.8Mbits~41.5Mbits
                         2/3:2.45Mbits~55.5Mbits
                         3/4:2.75Mbits~62.3Mbits
                         5/6:3Mbits~70Mbits
                         7/8:3.2Mbits~73Mbits
★  Power supply:        220V±10%
★  Whole power loss:     15W
 
IP interface Technical Indexes
 
Standard: with IEEE802.3/10 Base-T / 100Base-T(optional)
Data speed:  two-way 10/ 35 Mbps optional
UTP mode: full duplex 
Speed of packet filtering and transmitting: 15,000pps。
Buffer area: 256 frames
Time delay: 1 frame
 
Stream receiving module
 
Full compatible high frequency head: 450~2500MHz
QPSK modulator symbol support 2-45Mbps
25programmable channels
Automobile forward error correction
LNB short-circuit protection
Friendly operation interface, liquid-crystal displays the Received Signal Strength and signal quality.
Input signal level: (-25~ -85)dBm
The stream receiving RF port feeds outside, and do not form short circuit while operating
 
The picture of front and back panel
 
Front Panel
 
Back Panel
 
Interface Instruction
NO.
Interface name
1
Ethernet interface
2、3、6、7
ASI input
4、5
ASI output
8
LNB input port
9
IF output
10
The socket of power switch
 
 
 
 
 
 

Tel:86-773-5800805/5820488    Fax:86-773-5820488    E-mail:glmingke_88@hotmail.com 

 Copyright© Guilin mingke communication equipment Co.,Ltd |GUI prepared ICP No. 05015335